Model No: 1.2714/L6/5CrNiMoV
UT 1.2714/L6/5CrNiMoV
Application
For Wear resistance required plastic moulds, hot forging moulds and hot shear moulds can be also used for cold work processing. The steel is appropriate for knives during the cold cutting of materials of thick thicknesses, and knives for scrap iron. For pressing of plastic substances, big forces and breeze-blocks can be produced from this steel and these can be hardened in air.
For Wear resistance required plastic moulds, hot forging moulds and hot shear moulds can be also used for cold work processing. The steel is appropriate for knives during the cold cutting of materials of thick thicknesses, and knives for scrap iron. For pressing of plastic substances, big forces and breeze-blocks can be produced from this steel and these can be hardened in air.
minimum order :
10 tonnes
Quantity :
Subscribe to our Newsletter
UT 1.2714/L6/5CrNiMoV Cr-Ni alloy die steel has good hardenability, high wear resistance and thermal fatigue resistance，which can be nitrided
Chemical Composition(%)
Application
For Wear resistance required plastic moulds, hot forging moulds and hot shear moulds, can be also used for cold work processing. The steel is appropriate for knives during the cold cutting of materials of thick thicknesses, knives for scrap iron. For pressing of plastic substances, big forces and breeze-blocks can be produced from this steel and these can be hardened in air.
| Steel Grade | 1.2714/L6/5CrNiMoV |
| Dimension | Thick 2-300mm x Width 200-800mm / Diameter Ø8~1350mm |
| Delivery Condition | HB≤248 |
| Surface Treatment | Black Surface / Rough Machined Surface / Turned Surface |
| Production Condition | Two Sides Cut or Four Sides Cut |
| Stock Quantity | 1800 tons |
| Ultrasonic Test | Sep1921-84 D/D or E/e Under 100% Test |
| MOQ | 10 tonnes |
| Mill Sheet Certificate | Provided |
| HS Code | Hot Rolled:722830 Forged: 722840 |
| Technique | Hot Rolled / Forged |
| Lead Time | 7-10 days |
| Trademark | UTSTEEL |
Chemical Composition(%)
| C | Si | Mn | Cr | Mo | Ni | S | V |
| 0.50~0.60 | 0.10~0.40 | 0.60~0.90 | 0.80~1.20 | 0.35~0.55 | 1.50~1.80 | 0.05~0.15 |
Application
For Wear resistance required plastic moulds, hot forging moulds and hot shear moulds, can be also used for cold work processing. The steel is appropriate for knives during the cold cutting of materials of thick thicknesses, knives for scrap iron. For pressing of plastic substances, big forces and breeze-blocks can be produced from this steel and these can be hardened in air.
UTSTEEL LIMITED specializes in providing top-notch tool steel (including hot work tool steel) and high-quality mold steel—contact our expert team today for a free quote!
