Model No: 1.7035/5140/40Cr
UT 1.7035/5140/40Cr
Application
After tempering, it is used to manufacture mechanical parts that can bear the medium load and moderate speed, such as steering knuckle of automobiles, rear axle, gears, shafts, worm shafts, spline shafts, and center sleeves on machine tools.
After tempering, it is used to manufacture mechanical parts that can bear the medium load and moderate speed, such as steering knuckle of automobiles, rear axle, gears, shafts, worm shafts, spline shafts, and center sleeves on machine tools.
minimum order :
10 tonnes
Quantity :
Subscribe to our Newsletter
UT 1.7035/5140/40Cr alloy structural steel is medium carbon tempered steel, which is cold heading steel and easy to process, after proper heat treatment it can obtain a certain toughness, plasticity, and abrasion resistance.
Chemical Composition(%)
Application
UT 1.7035/5140/40Cr alloy structural steel After tempering, it is used to manufacture mechanical parts that can bear the medium load and moderate speed, such as steering knuckle of automobiles, rear axle, gears, shafts, worm shafts, spline shafts, and center sleeves on machine tools.
UTSTEEL LIMITED specializes in providing top-notch tool steel, high-quality mold steel, precision steel round bar, and high-grade alloy structural steel, backed by our expert team dedicated to superior products and service—contact us today for a free quote.
| Steel Grade | 1.7035/5140/40Cr |
| Dimension | Thick 10-200mm x Width 300-2000mm / Diameter Ø20~300mm |
| Delivery Condition | HB≤207 |
| Surface Treatment | Black Surface / Roughed Machined Surface / Peeled Surface /Turned Surface |
| Production Condition | Two Sides Cut or Four Sides Cut |
| Stock Quantity | 1500 tons |
| Ultrasonic Test | Sep1921-84 D/D or E/e Under 100% Test |
| MOQ | 10 tonnes |
| Mill Sheet Certificate | Provided |
| HS Code | Hot Rolled:722830 Forged: 722840 |
| Technique | Hot Rolled / Forged |
| Lead Time | 7-10 days |
| Trademark | UTSTEEL |
Chemical Composition(%)
| C | Si | Mn | Cr | Mo | Ni | S |
| 0.38~0.45 | ≤0.40 | 0.6~0.9 | 0.90~1.20 | ≤0.10 | ≤0.30 |
Application
UT 1.7035/5140/40Cr alloy structural steel After tempering, it is used to manufacture mechanical parts that can bear the medium load and moderate speed, such as steering knuckle of automobiles, rear axle, gears, shafts, worm shafts, spline shafts, and center sleeves on machine tools.
UTSTEEL LIMITED specializes in providing top-notch tool steel, high-quality mold steel, precision steel round bar, and high-grade alloy structural steel, backed by our expert team dedicated to superior products and service—contact us today for a free quote.
