Model No: 1.7225/4140/42CrMo
UT 1.7225/4140/42CrMo
APPLICATION
Suitable for manufacturing large and medium-sized plastic moulds which require a certain strength and toughness, such as locomotive traction gear, supercharger transmission gear, pressure vessel gear, rear axle, connecting rod, and spring clamp with maximum load, It can also be used for drilling pipe joints and salvage tool in deep oil wells below 2000m, and moulds of bending machines
Suitable for manufacturing large and medium-sized plastic moulds which require a certain strength and toughness, such as locomotive traction gear, supercharger transmission gear, pressure vessel gear, rear axle, connecting rod, and spring clamp with maximum load, It can also be used for drilling pipe joints and salvage tool in deep oil wells below 2000m, and moulds of bending machines
minimum order :
10 tonnes
Quantity :
Subscribe to our Newsletter
UT 1.7225/4140/42CrMo Alloy Structural steel belongs to ultra high strength steel, with high strength and toughness, and good hardenability.
Chemical Composition(%)
Application
Suitable for manufacturing large and medium-sized plastic moulds which require a certain strength and toughness, such as locomotive traction gear, supercharger transmission gear, pressure vessel gear, rear axle, connecting rod and spring clamp with maximum load, I can also be used for drilling pipe joints andsalvage tool in deep oil wells below 2000m, and moulds of bending machines
| Steel Grade | 1.7225/4140/42CrMo |
| Dimension | Thick 14-800mm x Width 100-3000mm / Diameter Ø50~1500mm |
| Delivery Condition | HB≤217 |
| Surface Treatment | Black Surface / Milled Surface |
| Production Condition | Two Sides Cut or Four Sides Cut |
| Stock Quantity | 1500 tons |
| Ultrasonic Test | Sep1921-84 D/D or E/e Under 100% Test |
| MOQ | 10 tonnes |
| Mill Sheet Certificate | Provided |
| HS Code | Hot Rolled:722830 Forged: 722840 |
| Technique | Hot Rolled / Forged |
| Lead Time | 7-10 days |
| Trademark | UTSTEEL |
Chemical Composition(%)
| C | Si | Mn | Cr | Mo | Ni | S |
| 0.38~0.45 | ≤0.40 | 0.6~0.9 | 0.90~1.2 | 0.15~0.3 |
Application
Suitable for manufacturing large and medium-sized plastic moulds which require a certain strength and toughness, such as locomotive traction gear, supercharger transmission gear, pressure vessel gear, rear axle, connecting rod and spring clamp with maximum load, I can also be used for drilling pipe joints andsalvage tool in deep oil wells below 2000m, and moulds of bending machines
UTSTEEL LIMITED specializes in providing top-notch tool steel and structure of steel alloy to our customers, with a team of experts dedicated to delivering the best service—contact us today for a free quote.
